biodiesel home kits

Complete biodiesel home kits

Price: $2,295

In addition to the standard DIY biodiesel home kits, we deliver a 80 gallon water heater. A full set of directions is included along with an hour of telephone support. It only takes a few hours to assemble. Make your own fuel for as little as $0.70 per gallon! This biodiesel kit processor produces 55 gallons of useable fuel in about three hours of hands-on processing time. Other processors sell for $3,000.00 and don't heat oil properly for winter processing.

Includes:

• 12 GPM Powerful Utility Pump (720 Gallons per Hour)
• Ball Valves
• Temperature Gauge
• Mostly Assembled Plumbing
• Connectors, Clamps & Tape
• Safety Glasses, Gloves & Apron
• Assembly and use instructions
  PLUS!
• 80 Gallon Water Heater
• 85 Gallon Cone Bottom Tank
• 15 Gallon Methoxide Carboy
• Plastic Siphon Pump
• Hydrometer w/Cylinder
• Plastic Lab Set
• Digital and Kitchen Scales
• Strainer & Filter
• pH papers

You Supply:

• Drums for Methanol and Oil
• Waste Cooking Oil (free from local restaurants)
• Methanol (from local go-cart track)
• Red Devil Lye (from grocery or hardware store)

  A water heater is the best solution for a home biodiesel kit processor for a lot of reasons. For starters they can be made fumeless. This means toxic and explosive methanol is controlled. Also, water heaters include a heating element and a thermostat. The best reason for me was insulation. Anyone who has tried to heat 30 gallons of oil to 150 degrees knows that without insulation this is not going to happen in the winter. Water heater processors are good for recovering excess methanol from a reaction. This cuts the cost per gallon even further.

  More info

  I wanna buy it!

See also:

• Low-range Kits
• Mid-range Kits
• High-range Kits
• The Encyclopedia of Making Biodiesel at Home
• The "Down and Dirty" Guide to Biodiesel Processors
• The "Down and Dirty" Guide to Biodiesel Recipes
• Washing and Quality Testing Biodiesel
• Making Algae Biodiesel at Home